This article explains how to use some USB to 4Serial Module on your CORE9G25 Boards

The USB to 4Serial Module tested, based on FT4232 chips, are:

Insert the USB to 4Serial Module to the board

Insert the USB to Ethernet adapter on your CORE9G25 Board USB port. These messages should appear on the debug port or by typing dmesg command:

USB miniadapter message

# usb 2-3: new full-speed USB device number 3 using at91_ohci
usb 2-3: not running at top speed; connect to a high speed hub
usb 2-3: New USB device found, idVendor=0403, idProduct=6011
usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-3: Product: USB <-> Serial Converter
usb 2-3: Manufacturer: FTDI
usb 2-3: SerialNumber: FTWZRH0Z
ftdi_sio 2-3:1.0: FTDI USB Serial Device converter detected
usb 2-3: Detected FT4232H
usb 2-3: Number of endpoints 2
usb 2-3: Endpoint 1 MaxPacketSize 64
usb 2-3: Endpoint 2 MaxPacketSize 64
usb 2-3: Setting MaxPacketSize 64
usb 2-3: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio 2-3:1.1: FTDI USB Serial Device converter detected
usb 2-3: Detected FT4232H
usb 2-3: Number of endpoints 2
usb 2-3: Endpoint 1 MaxPacketSize 64
usb 2-3: Endpoint 2 MaxPacketSize 64
usb 2-3: Setting MaxPacketSize 64
usb 2-3: FTDI USB Serial Device converter now attached to ttyUSB1
ftdi_sio 2-3:1.2: FTDI USB Serial Device converter detected
usb 2-3: Detected FT4232H
usb 2-3: Number of endpoints 2
usb 2-3: Endpoint 1 MaxPacketSize 64
usb 2-3: Endpoint 2 MaxPacketSize 64
usb 2-3: Setting MaxPacketSize 64
usb 2-3: FTDI USB Serial Device converter now attached to ttyUSB2
ftdi_sio 2-3:1.3: FTDI USB Serial Device converter detected
usb 2-3: Detected FT4232H
usb 2-3: Number of endpoints 2
usb 2-3: Endpoint 1 MaxPacketSize 64
usb 2-3: Endpoint 2 MaxPacketSize 64
usb 2-3: Setting MaxPacketSize 64
usb 2-3: FTDI USB Serial Device converter now attached to ttyUSB3

If you don't obtain these messages you will probably have to update Kernel uImage file.

When you get the right messages try to type this command:

# ls /dev/ttyUSB*
/dev/ttyUSB0  /dev/ttyUSB1  /dev/ttyUSB2  /dev/ttyUSB3

which provides info about the Four serial port info, the Correspondence between linux inode and hardware interface is as follow: 

Interface on the module Linux inode  
J4 /dev/ttyUSB0  
J2 /dev/ttyUSB1  
J3 /dev/ttyUSB2  
J5 /dev/ttyUSB3  

Test the serial port

Refer the follow chapter to test the Serial port, it is the TTL level, you can expand it to the RS232/RS485/RS422 level with the module we provide.


Market Mail : market@armdevs.com
Support Mail: support@armdevs.com Sales Phone: +86-755-29638421


CoreWind Online Chat>
Work time: 09:00-18:00
Copyright @ 2014 to 2020 - CoreWind Tech.