This article illustrates how to generate a bootable Linux Kernel 3.6.9 image for CORE9G25

Hardware requirements:

Installing the toolchain:

Install the cross compiler and the toolchain required on your PC following this article:

Prepare the Kernel sources and build it:

Copy the CORE9G25 linux-at91.tar.bz2 from the CD to the tmp folder, then do the follow command to uncompress it:

~$ cd ~
~$ tar xvf /tmp/linux-at91.tar.bz2 -C .

then move in the linux-at91 folder:

~$ cd linux-at91
~/linux-at91$ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- distclean
~/linux-at91$ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- at91_dt_defconfig

A file called .config will be generated inside the Linux source root directory. All the changes you will make using make menuconfig will be saved on this file so if you want to create you own default configuration simple copy the new .config file in arch/arm/configs with a name like at91_dt_defconfig.

the device tree source file (.dts) for your board is in arch/arm/boot/dts/at91sam9g25ek.dts.

then compile it to generate a device tree blob file (.dtb) by typing:

~/linux-at91$ make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- dtbs

This file will be used by the Linux Kernel at startup time to configure the initial state of your hardware.

Customize the default Linux Kernel configuration:

If you need customize the Kernel configuration by using menuconfig type:

~/linux-at91$ make ARCH=arm menuconfig

Running the Kernel compilation

To compile the Linux Kernel type:

~/linux-at91$ make -j4 ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- uImage
...
Kernel: arch/arm/boot/uImage is ready

Copying the binary files generated in the USB Disk

Insert a USB Disk and copy the bootable Linux kernel file uImage file and the hardware description file at91sam9g25ek.dtb into the USB Disk:

~/linux-at91$ cp arch/arm/boot/dts/at91sam9g25ek.dtb /media/usbdisk/
~/linux-at91$ cp arch/arm/boot/uImage /media/usbdisk/

The /media/usbdisk is the USB Disk folder in ubuntu

Use the new Kernel with Buildroot

Follow this article:

Quick and dirty test

If you want to try the new Kernel quickly use the binary available on:

Related links


Market Mail : market@armdevs.com
Support Mail: support@armdevs.com Sales Phone: +86-755-29638421


CoreWind Online Chat>
Work time: 09:00-18:00
Copyright @ 2014 to 2020 - CoreWind Tech.